Installation Tips
Single Coil Razor Wire Concertina - Typical Installations |
1. Single Coil - Razor Wire Concertina (RWC) |
|
2. Razor Wire Concertina Installation onto Fence |
|
3. Razor Wire Concertina Installation onto Fence
|
|
4. Fixing for Razor Wire Concertina Installation to Pre-cast Wall
|
|
5. Razor Wire Concertina Installation to Wall |
|
Electrocoil - Typical Installations |
|
The Electrocoil comprises a standard coil of Razor Wire Concertina incorporating an inner spiral coil of wire which is insulated from the outer coil. This provides the ideal system to convey an electric circuit through the barrier for passive intrusion detection or non-lethal repulse shock pueposes. |
The Electrocoil is simple to integrate into a barrier making it the most cost effective system available. |
|
Razor Strip |
 Coil of Razor Strip
|
Razor Mesh |
-
Rolls of Razor Mesh to be carried at site, not dragged along the ground
-
Open each roll and remove sheets individually. Force should not be used to separate the sheets.
-
Fit the sheet to the top of the straining wire first - Do not stretch the sheet.
-
Bind the sheet onto the straining wire from top to bottom - Do not stretch the sheet.
-
Adjoining the panel should not be fitted to the straining wires until the first sheet is completely fixed to the straining wires.
-
Each sheet has a male and female side - Care should be taken so that the sheets interlock.
|
Note: Specifications may change without notice. All dimensions are approximate, manufacturers tolerances apply. |
